The Mercedes-Benz Flat Bottom vs Round Steering Wheel
A squared lower arc changes thigh room, the view down and the feel at full lock. How the Mercedes-Benz flat bottom rim compares with round across the range.
Read More →Guide · 10/9/2026
How to specify a custom steering wheel for a Mercedes-Benz CLS-Class, from the C218 to the C257 and the AMG versions: fitment, wood and leather, coding.
The CLS started a fashion for four-door cars that look like coupés, and it still trades on that shape. Owners tend to keep one for years, and the interior is part of what they paid for. A worn rim spoils that impression faster than anything else in the cabin. A custom Mercedes-Benz CLS steering wheel brings the surface your hands rest on back to the standard the rest of the car sets.
Two generations cover almost every car on the road, and the wheel changed between them. Match your car in the table, then let us confirm the detail.
| Chassis | Model and typical years | What usually matters |
|---|---|---|
| C218 | CLS, 2011 to 2018 | Earlier button layout; trims vary widely |
| C218 AMG | CLS 63, 2011 to 2018 | Thicker rim and its own spoke trim |
| C257 | CLS, 2018 onwards | Newer cluster and airbag cover |
| C257 AMG | CLS 53, 2019 onwards | Different trim and paddle specification |
The chassis code settles more than the badge on the boot. Cars change hands with wheels from other trims, so a photograph and the option list decide what the number alone cannot.
These cars cover two kinds of journey. One is a short trip around town. The other is a long run with passengers in the back. Both put a hand on the rim for long stretches, and the leather at nine and three polishes well before the seats age. Since the cabin is quiet and well trimmed, the shine stands out.
Buyers also want a different look. The standard wheel rarely matches the wood or the stitching elsewhere in the car, and a retrim is the chance to tie those together. Each Mercedes-Benz CLS steering wheel is built to your chassis. The wood, the leather and the thread are chosen at order rather than taken from a list.
Four combinations cover almost every CLS order we build. The interior already in the car sets the starting point.
High-gloss black ash wood uses an open grain under a polished finish. It catches light along the top of the rim and matches the gloss trim panels used in later cars. A microfibre cloth keeps it clear of fingerprints.
Open-pore walnut shows the grain without a reflective coat. It suits earlier cars with matte trim, and it stays quiet in strong sunlight. The surface asks for little beyond an occasional wipe.
Smooth black Nappa covers the side grips and matches the leather Mercedes-Benz fits itself. It is the softest option on a long drive and the easiest to keep clean.
Perforated Nappa keeps the palms dry on a warm afternoon. The perforated section usually stays on the grips, leaving the upper rim in wood.
| Combination | How it feels | Care | Suits |
|---|---|---|---|
| High-gloss black ash | Polished, reflective | Microfibre wipe | Later cars with gloss trim |
| Open-pore walnut | Warm, matte grain | Occasional wipe | Earlier cars with matte trim |
| Smooth black Nappa | Softest grip | Damp cloth | Long-distance use |
| Perforated Nappa | Cool and dry | Balm twice yearly | Warm climates |
Start with the chassis number and the full option list. Add a daylight photograph of the wheel face and one of its rear with the airbag removed. Whether a Mercedes-Benz CLS steering wheel fits your car turns on those details rather than on the trim badge.
Cars of the same model year can leave the factory with different button clusters. The photographs show us the spoke profile, the cluster and the connector shape. We cut nothing until the match is confirmed, and we will ask for a clearer picture rather than guess.
A new finish should not cost you a working switch. Our builds reuse the frame and the wiring already fitted to your car.
| Function | Typical outcome |
|---|---|
| Airbag | Original module normally reused; cover shaped to suit it |
| Multifunction buttons | Retained when the original button frame is reused |
| Paddle shifters | Retained on cars that have them; cut-outs set at order |
| Heated rim | Depends on the heating element and trim; confirm first |
| Driver assistance | Depends on the hands-on detection in the original wheel |
The heating mat and the hands-on sensor sit behind the rim. Both need their own photograph, and neither can be judged from the front face.
Rebuilding your own wheel keeps the electronics exactly as Mercedes-Benz assembled them. The frame, the loom and the paddles stay standard, which is the safer route on a newer C257.
A newly made core is the other option, and it leaves your original wheel in the garage. This suits a leased car that must return to standard, or an owner who plans to sell.
An airbag sits at the centre of this work, so give it to someone qualified. Isolate the battery and let the car power down fully before loosening fasteners. Follow Mercedes-Benz procedure for your chassis rather than a general guide found online. Rest the module on something soft, and tighten the centre fastener to the figure in the workshop manual. Nothing else should be trusted for that number.
Drive a short loop afterwards and confirm the rim is centred. Try the buttons, any paddles, and the horn one by one. Any warning lamp left on means a scan is needed before further use.
Warranty questions follow any modification. An aftermarket steering wheel does not automatically void a vehicle warranty under U.S. federal warranty law, but warranty coverage can still depend on whether the modification caused the specific failure being claimed.
Coding depends on the car rather than the finish. Where the factory module, the loom and the vehicle-specific parts are reused, further coding may not be needed. A module from another generation is a different case, and the control unit may then have to learn what is present.
Because that varies between cars, we describe coding as a possible step rather than a certainty. Send the chassis number with images of both electronic units and we will say whether a workshop visit looks likely.
Problems on these cars rarely come from the covering. They come from fitment. A wheel from a neighbouring generation often shares the badge but not the button cluster. A heated rim on a car that never had one leaves a spare plug and a control doing nothing. The opposite error appears just as often. Driver assistance depends on sensing hardware inside the factory rim, so replacing it can raise messages. A cover shaped for an AMG airbag arriving on a standard car is the quiet cosmetic failure. The checks above clear every case.
A retrimmed wheel changes small habits. The rim sits differently in the hand at first, and most drivers stop noticing within a week of ordinary driving. Owners who take long trips usually report the difference in the shoulders rather than in the hands.
Care is simple if it is regular. A microfibre cloth and a mild soap keep wood and leather in good order. Solvents and abrasive polishes do more harm than good, so keep them away from the stitching and from the grain.
No. The generations use different clusters and connectors, so each car is checked on its own merits.
A photograph of the dashboard in daylight lets us match the grain and the finish as closely as the material allows.
Only for a donor build. A newly made core leaves your factory wheel with you.
On cars that have them, yes. Tell us which type is fitted and we will confirm before anything is made.
The workshop needs ten to fifteen working days, and delivery takes another fifteen to twenty. The whole lead time therefore lands between twenty-five and thirty-five days.
Not as it is used here. Wood runs along the upper and lower rim, and the grips stay in leather where your hands close.
The airbag module is reused, and the cover is shaped around it. That is why photographs of the rear matter before an order is accepted.
Yes, if you choose a newly made core. A donor build uses your own wheel, and it returns with the new covering fitted.
Rims are cut, stitched and assembled in our own Guangzhou workshop, one car at a time. A design and manufacturing record that now exceeds 13 years stands behind the patterns we offer, so nothing is cut before your chassis is confirmed. Wood, leather, stitching and rim shape stay in your hands. Every order travels tracked, is covered for three years, and may be returned within thirty days through an RMA request.
Two other guides on this site answer the questions that follow this one. The S-Class guide covers the larger saloon and the same wood and leather choices, while the A-Class guide deals with the compact car. The full range sits in the shop, and the Mercedes-Benz pages are the brand listing and the CLS-Class page.
Photograph the wheel where it sits, add the chassis number and the option list, and send them across. We will reply with a confirmed build and a date before we make your Mercedes-Benz CLS steering wheel. The catalogue holds one wheel for the CLS generations. It is the forged carbon wheel listed for the C218, C219 and C257. Wood and leather can also be specified if you prefer that combination.
More detail is available on request. The installation guide walks through the battery and airbag sequence, and the FAQ gathers the questions we hear most. Our about page sets out the workshop and the team behind these builds. Fitment and shipping questions go through the inquiry form or the contact page. Delivery expectations appear in the shipping policy, and returns sit under the return and refund policy. American warranty law is set out in 15 U.S.C. 2304, and air bag requirements appear in 49 CFR 571.208.
A squared lower arc changes thigh room, the view down and the feel at full lock. How the Mercedes-Benz flat bottom rim compares with round across the range.
Read More →Gloss or matte carbon on a Mercedes-Benz steering wheel? How the two finishes differ in sunlight, cleaning and wear, and which suits your parking situation.
Read More →Carbon fibre, Alcantara or leather? How the three Mercedes-Benz steering wheel materials compare on grip, care and wear, and where each belongs on the rim.
Read More →